EVO6-NK-G Screw Air Compact Unit with Gear Drive

EVO6-NK-G帶齒輪傳動的螺桿式空氣壓縮主機

Power range up to 37 kW / 50 HP

功率范圍高達37 kW/50 HP

Capacity up to 5.5 m3/min / 220 cfm

排氣量高達5.5 m3/min/220 cfm

Pressure up to 15 barg / 220 psig

壓力高達15 barg/220 psig

Weight approx. 124 kg / 273 lbs

重量約為124 kg/273 lbs

Our unique series of NK compact units are oil-injected screw compressor modules that integrate the main parts of a compressor system. This solution is the best possible way to build a reliable, compact and cost efficient complete compressor package with ultimate efficiency, low noise and the highest quality standards.

Our EVO-NK-G compact unit is an oil-injected screw compressor module that integrate the main parts of a compressor system and provide optimum operation reliability and reduced design costs for your compressor package.

The following components are integrated into each compact unit: EVO? oil-injected air end with ROLLING PROFILE?, intake valve with control unit and air filter, oil reservoir and oil separation system with coalescing cartridge(s), oil filter and oil thermostat valve, minimum pressure valve and non return valve.

Various options are also available, such as safety valve, oil level sight glass and maintenance indicators.

Advantages of our new EVO? technology

New ROLLING PROFILE? – ultimate efficiency with reduced noise

Long life cycle due to increased bearing dimensions and wear-free ROLLING PROFILE?

Wide operating pressure range from 5 to 15 barg

High manufacturer assembling – "Made in Germany"

Quality assurance – bench test of every air end before leaving our factory

Easy application selection with our new ROTORCOMP? SIZING AIR Software

Highest flexibility for your package design

Suitable for all types of motors

Drive options: Belt drive, direct drive, internal gear drive

Base and face-flange mounting

獨特的NK緊湊型機組系列是噴油螺桿壓縮機模塊，集成了壓縮機系統的主要部件。該解決方案是構建可靠、緊湊、經濟高效的完整壓縮機組件的最佳方式，具有最高的效率、低噪音和最高的質量標準。

EVO-NK-G緊湊型機組是一種噴油螺桿壓縮機模塊，它集成了壓縮機系統的主要部件，為您的壓縮機組件提供最佳的運行可靠性和降低的設計成本。

以下部件集成到每個緊湊型裝置中：帶滾動剖面?的EVO?噴油空氣端、帶控制單元和空氣濾清器的進氣閥、帶凝聚筒的儲油器和油分離系統、油濾清器和油恒溫器閥、最小壓力閥和止回閥。

還提供各種選項，如安全閥、油位觀察窗和維護指示器。

我們新EVO?技術的優勢

全新滾動型材?–降低噪音的終極效率

由于軸承尺寸增加和無磨損滾動型材?，壽命周期長

工作壓力范圍寬，從5 barg到15 barg

高制造商組裝-“德國制造”

質量保證-出廠前對每個空氣端進行臺架試驗

使用我們新的ROTORCOMP?Size AIR軟件，輕松選擇應用程序

為您的包裝設計提供最高的靈活性

適用于所有類型的電機

驅動選項：皮帶驅動、直接驅動、內部齒輪驅動

底座和端面法蘭安裝

更多請與我們聯系